pawscal

Ok Im going to vent a little here because so far my PTW experience has not been a good one.

I bought a SCK about one month ago, I assembled it myself and everything went togeter great. However, first game I brougt it out I keeped burning the fuse, it turned out it was the uselees setscrew at the bottom of the grip was tightening itself on the motor and drawing too much power. Madmax figuered it out and it was working again in no time.

My next problem with the ptw has benn alot more agravateing however, The gun chop balls like craysy and misfeeds like no tomowrow! I understand the PTW is picky on its bbs I have been useing bb bastards and MT as they are usualy recomended by ptw owners. however whatever make of bb i still get the same problem. I Took the followers out of the mags however they did not remedy the situation. it will constantly stop shooting in the midle of the mag, then a couple of taps on the mag and she is fine for say 10 shots. And will chop about 10% of the mag.


I payed good money for this gun and I am frankly quite disapointed if this is normal behaviour. I cant imagine any law enforcemnt agency useing ptw if they all have this problem.

While shooting today the cylinder that came with the gun the cylinder head also unthreaded itself as they seem to all be doing lately... wow great...


Seems like the bolt catch is not really working like its supposed to as i rarely have to press it when changeing mags...

Overall im gettting frustrated, the feeding issue is extremly anoyeing as it is barely gameable as-is, as im always clearing jams or takeing out the mag and knocking it.


I hope this problem is fixable as im about to dump it and go back to my trusty tm m16